This button is also available in the Layer Properties dialog.įinally we want to see our Bobsboat a bit more nicely. Either via the menu Layer -> Delete empty, or - more easy - just click the corresponding button. Then select the aft halfs of the panels and assign them back to the original layer. Select all points or edges of the projections in front of the bow and aft of the transom and delete them via the menu Edit -> Delete, or - more easy - just click the corresponding button.
The rest of our design is clean-up work: Make all layers visible. by running a face in close distance parallel to an existing face. If your design would require a third face connected to one edge, then you'll need to find ways around it, e.g. Wait - I forgot to mention one issue: Every edge can belong only to one or two faces, not to more. I have selected the sheer line, so it appears as yellow:įinished! You know by now pretty much all features that you need to edit a hull. Now let's have a look at the Bodyplan view. The point below we set to Z=0-30, and the frontmost point of the bottom panel (at X=18) to Z=0-6. We select the top, frontmost point, at X=20, and set it to Z=0-36. Hey, we have now completely defined the cross section at the max. From the Bow view we know also the width of the bottom at X=9: We set the outer point of the bottom panel to Y=0-24.
The points at X=9 at both sides of the bottom panel will be at Z=0. We select the point at X=9 at the lower edge of the side panel and set Z=0-9.
So we select the point at X=9 at the sheer and set Z=0-24 (i.e.
What we know from the Bow view are the coordinates at X=9 and at the stem. We do that by unchecking the box in front of their names in the layer dialog. Since the aft part only disturbs us, we'll hide those layers: Sides Aft, Bilge Aft, Bottom Aft, View Aft. FREE!ship Tutorial - Forming the Hull How to Use FREE!ship - an unofficial tutorial - Part 4: Forming the Hull - Z Axisįirst we'll do the forward half of the boat.
0 kommentar(er)
